In-phone answering machine

<< < (2/2)

MurrayB:
In the Voip.ms settings go to manage DIDS, pick your DID and go to edit settings, go down to ring time in seconds select a longer time, I have mine set for 60, then click the bar right under the time selection - apply dial time out for selected DIDs.

I hope this does it for you. Good Luck!

graces_s:
I figured it out. The problem was that I had set up a ring group in voip.ms so my cell prone rings as well. The ring time needed to be configured for the device in the group settings. The main DID setting doesn't work in this context.

Thanks again.

MurrayB:
I am glad you worked it out. My initial thought was ring groups but use of a cell with VM would preclude your use of the Dect6 answering machine. That led me to the ring time. I use ring groups for some of my DID with a cell phone and others with no ring group and the answering machine.

Voip.ms is very versatile and feature rich it is easy to forget some of our settings.

Navigation

[0] Message Index

[*] Previous page