obi110 and asterisk - no outgoing calls
RonR:
Does that Call History show the correct number was dialed on the LINE Port? From what I'm seeing, it appears the call was made properly on the LINE Port and the OBi thinks it was answered.
You cannot enable Do Not Disturb or Call Forward All in the OBi itself. If you do, ALL InboundCallRoute processing in the OBi on SP1, SP2, and LINE will stop functoning.
jfnichols:
The call history does show the correct number, but the phone that I dialed does not ring at all and the pstn at least doesnt seem to ever get used since I can pick up a regular phone while the sip phone making the call is ringing and the regular phone still has a dial tone.
Both the obi and the asterisk box do indicate that the call has been answered even though it has not been.
RonR:
That's really weird. Making a PSTN call from the OBi's PHONE Port and making a call from SP2's InboundCallRoute should be identical as far as actually manipulating the LINE Port goes. If a call from the OBi phone works, one from SP2 should also.
jfnichols:
I see what you mean.
Do you think it could be asterisk that is first incorrectly declaring the call as answered? It seems like asterisk would be receiving that signal from the obi which would get it from the phone line, though.
I'll do some more troubleshooting later and see what I can come up with. thanks for your input.
RonR:
Quote from: jfnichols on July 10, 2011, 09:22:04 am
Do you think it could be asterisk that is first incorrectly declaring the call as answered? It seems like asterisk would be receiving that signal from the obi which would get it from the phone line, though.
The OBi handles the LINE Port (and every other trunk) totally on its own. From the Call History log you posted, it appears the OBi thinks the call on the LINE Port was made and answered (and if so, would report same back to Asterisk).
There's something missing here. Things don't appear to be as they seem.
Navigation
[0] Message Index
[#] Next page
[*] Previous page