Fastvoip on SP2
RonR:
I didn't realize Fastvoip was one of many Betamax 'services'. My condolences to you. :(
I tried them for a very brief period when they first sprung up and would never deal with them again.
kartoffel:
I wonder if fastvoip demands some specific settings to be changed. They do have a "Call Without Registration" option using Linksys-PAP2.
http://www.fastvoip.com/en/help/configure-linksys-pap2/
RonR:
You could try not registering:
Voice Services -> SP2 -> X_RegisterEnable : (unchecked)
and see if you can make outgoing calls.
kartoffel:
Quote from: RonR on July 10, 2011, 12:27:03 pm
Voice Services -> SP2 -> X_RegisterEnable : (unchecked)
That didn't work either, now SP2 status says: "Registration Not Required".
However, dialing a number (**2-country code-7 digit number) fails.
On dialing, Obitalk says the number was rejected by the service provider with reason 500.
RonR:
If your ITSPB DigitMap is:
(<00>1xxxxxxxxxx|<001>[2-9]xxxxxxxxx|<001aaa>xxxxxxx|<011:00>xx.|(Mipd)|[^*]@@.'@'@@.)
For an international call, you would dial:
**2 + 011 + countrycode + number
which would go out SP2 as:
00 + countrycode + number
For a 7-, 10-, or 11-digit US/Canada call, you would dial:
**2 + 7/10/11 digits
which would go out SP2 as
00 + 1 + 10-digits (your local area code added to 7-digit numbers)
Navigation
[0] Message Index
[#] Next page
[*] Previous page