202+Callcentric+unique ringing
Maine_Yankee:
So I am building up a 202 for a 3-4 number Callcentric account. I am configuring it from the remote obihai portal <https://www.obitalk.com/obinet/pg/obhdev> as the eventual users are several states away.
I read several old threads here on ringing but have not yet fully grasped how all the parts fit together......
I envision this as follows:
SP1: 9020 Port 1
SP2: 4755 Port 2
SP3: 8090 1 & 2
SP4: later
In other words, each spouse has her/his own line, but the house line (8090) rings both physical ports, so if Jack on on his line, Jill's will ring, & the inverse.
Plus, I want distinctive ringing cadences.
I have gone to the OBi Expert Configuration Menu, saved a "Oh crap" backup, entered Expert mode, and under Ring Setting found Ring Profile's A & B. And in each are ten Ring Patterns. And under Voice Service there are SP1-4 settings; within each is X_RingProfile (A vs. B).
BUT I don't see where the chosen {1 of 10 possible} Ring Pattern connect to a given SPn.
Plus, I'm unsure how call waiting and voicemail multiple lines fits together. I think I can specify the # of simultaneous calls on the Callcentric site; and that is per number, not account.
So Jack can have CW on 9020, Jill can NOT have it on 4755, so it & 8090 will just overflow to voicemail. True?
Can I have the 8090 NOT interrupt an in-use Port but the 2nd 9020 call will?
I'm sure this is enough questions to get me confused.....
[Click & Clack always said "The questions are always easy; it's the answers that are hard..."]
drgeoff:
A Voice Service uses one of the four available ITSPs. An ITSP uses either Ring Profile A or Ring Profile B. Each of Ring Profile A and B can be configured from the 10 patterns.
Maine_Yankee:
Do I have a backwards then?
The Profile A has one pattern, and B has one pattern; so you can have only 2 patterns on the box?
Taoman:
Choose your ring pattern for each trunk:
Voice Services -> SPx Service -> X_DefaultRing
drgeoff:
Quote from: Maine_Yankee on July 28, 2016, 03:28:07 pm
Do I have a backwards then?
The Profile A has one pattern, and B has one pattern; so you can have only 2 patterns on the box?
No, 20 patterns. !0 in Profile A and 10 in profile B. You select which of A and B Profiles and which of the 10 in that Profile you want an SP to use. X_RingProfile and X_DefaultRing.
Navigation
[0] Message Index
[#] Next page