PLEASE HELP WITH MY OBIHAI SETUP. IT IS NOT WORKING FOR ME.

(1/4) > >>

LSFD:
I have two google voice numbers which I intend to use separately (one for calls and the other for fax).  Below is my setup and I can not receive fax (but I can send fax).  It seems that when somebody sends me fax, Phone 1 (not Phone2) picks up the fax.  I am not sure on this; somebody with expertise please help me.  Is it my setup?

                                                                     Phone 1      Phone 2(Fax)
Primary Line for Outgoing Calls Route to:             SP1             SP2
Phone Rings on Incoming Calls from:                   SP1             SP2

LTN1:
Can you do a screenshot of each of the SP pages to ensure you have the proper box checked or unchecked? You can black out your confidential information before you post.

Also visually confirm again that the fax phone line runs from the fax to the phone 2 connection on the OBi202.

In your GV account (not the OBi configuration), how are you configuring the forwarding number? Are you forwarding it to both Google Chat and a forwarding number--or just Google Chat? Screenshots of both of your GV accounts forwarding number pages would also be helpful (of course, black out any of your personal information).

LSFD:
Attached please see the screen shots.  I set both GV voicemail to different cellphones if the phones are not pickedup.

azrobert:
You can check if the actual OBi202 configuration matches what you set on the portal.
Log directly into the OBi using the local interface.
Key the IP address of the OBi into a Web Browser.
Hit Enter
The UserID and default Password are both "admin".
Go to: Voice Services -> SP2 Service
The X_InboundCallRoute should be "ph2" or "{ph2}"

Edit:
Are you saying when someone calls your GV2#, the phone port #1 rings?

LSFD:
Appreciate your help.  My computer literacy is low. please be patient with me.  I think you meant this webpage, right?  I screenshot this webpage for you.

Navigation

[0] Message Index

[#] Next page