Use LOCAL IP address to manage OBI100 instead of OBITALK

(1/2) > >>

vskatusa:
Hi, I want my local IP address to be the DEFAULT to change any settings in my OBI100. How to make local IP address as default? When I set my speed dial using OBITALK it works but when I set the speed dial using my LOCAL IP address and boot it does not work.

drgeoff:
Disable Obitalk provisioning.

Log in to the local interface, click on System Management, click on Auto Provisioning, under Obitalk Provisioning select Disabled.

Note that you cannot 'mix and match' some settings locally and some on the Dashboard.  Use one method only.

vskatusa:
When you say "local interface" are you referring to obitalk.com --> system management -> auto provisioning select method = Disabled and check the radio button under "obitalk settings"?

Taoman:
Quote from: vskatusa on August 19, 2016, 12:21:40 pm

but when I set the speed dial using my LOCAL IP address and boot it does not work.


You are using the "local interface" to set the speed dial via a local ip address.

drgeoff:
Quote from: vskatusa on August 20, 2016, 05:28:19 am

When you say "local interface" are you referring to obitalk.com --> system management -> auto provisioning select method = Disabled and check the radio button under "obitalk settings"?

No.

I am referring to pointing your browser to the IP address that the OBi has on your LAN. Typically starting with 192.168.0. or 192.168.1. or 10.0.

Navigation

[0] Message Index

[#] Next page