Intercom to another extension
azrobert:
If you want to send *50 to Nextiva, the digit map needs to be modified.
Assuming Nextiva is defined on SP1 and SP1 is the Primary Line do the following:
Service Providers -> ITSP Profile A General -> DigitMap
Insert *50| after the beginning parenthesis
Edit:
The above is to dial *50 from the keypad.
Define a Programmable Key like this:
Function: Speed Dial
Service: SP1
Number: *50
zipp:
Thanks it worked
I am able to have 3 phones all 1062 with nextiva. Now i need to use 3 more location in building where i need ( 3 more phones) is there any way for me to use 3 with nextiva service and other 3 with obihi service ( without nextiva because the will charge me for each new extension upto 20 dollar per months plus taxes ) for mainly only basic extensions service or transfer call or intercom
azrobert:
Define a Programmable Key like this:
Function: Speed Dial
Service: OBiTalk Service
Number: 610123456
Replace 610123456 with the target 1062's OBi number.
I only have 1 1032, so I never tried barge in.
drgeoff:
Quote from: zipp on April 01, 2018, 10:06:03 am
Thanks it worked
I am able to have 3 phones all 1062 with nextiva. Now i need to use 3 more location in building where i need ( 3 more phones) is there any way for me to use 3 with nextiva service and other 3 with obihi service ( without nextiva because the will charge me for each new extension upto 20 dollar per months plus taxes ) for mainly only basic extensions service or transfer call or intercom
Did you look at OBiLINK?
zipp:
yes calling from one to other i get error "no You have dialed is not in service " I liked all in Obitalk used ext 20 30 40 also tried 20 21 22 only worked from one phone to other on 20# only but when tried same 20# from second phone did not work same error message
Also by using this way any way to transfer real call for nextiva to any of this phones ? without nextiva on it
Navigation
[0] Message Index
[#] Next page
[*] Previous page