Intercom to another extension
zipp:
Thanks for fast response
1) I am not sure were this code goes "code setup example uses *98 for this purpose:
*98, Barge In, set($barge-in1,1) "
2)when i manually dial *98 give me call failed:invalid number error
3)am i suppose to use extension no per obitalk or use 9 number obitalk number ?
4)how can i use this programmed on my programmable keys.
5) I am trying to use Nextiva service they told me this phone is not compatible with intercom ? or they don't have setup instruction how to do this with their voip service
6) i tried putting this code in 1062 voip phone using web setup in line key chose Obitalk as service and use code in number field? section but unable to get it to work.
drgeoff:
I haven't a clue what you are trying to do.
Are you trying to use an "intercom" facility that Nextiva provides or are you trying to do it using only Obihai features?
Maybe you want to look at OBiLINK. https://www.obitalk.com/ozone/link-devices
Why do you keep asking about the *98 code when I've already told you it is not an intercom? it is for barge-in to an existing call.
An alternative to OBiLINK, you can call another OBIPhone by its 9 digit number. You can assign a speed dial to that number. And/or you can assign a programmable key on the phone to a number.
If you want auto-answer read the manual and realise that it applies to all calls to the phone - external on any service provider and internal.
And last but not least, do you understand http://www.obitalk.com/forum/index.php?topic=61.msg109#msg109 ?
zipp:
Thanks again
i have tried to use speed dial assigned to key. even after, i did auto answer it keeps ringing on other extension it is not getting auto answer.
you asked if " Are you trying to use an "intercom" facility that Nextiva provides or are you trying to do it using only Obihai features?"
Nextiva service support told me this phone is not compatible with intercom ? is that true or you need to tell them how to setup with there service . they don't have setup instruction how to do this with their voip service
I am not sure were this code goes "code setup example uses *98 for this purpose:
*98, Barge In, set($barge-in1,1) " i still want to know this feature and how to implement it so i can talk to extension while they are on phone because *98 give me call failed:invalid number error still want to know why or what am i missing something?
i am using local admin login via LAN ip address like 10.10.10.30 or 31 or 32 to setup ip phones using local address not using Obitalk
drgeoff:
1. You have to configure that
*98, Barge In, set($barge-in1,1)
as a Star Code as it is not one in the default list. Note that by default *98 is set to be the DirectedCallPickup Feature code and should be disabled before trying to use as a Star Code.
However the default list of Star Codes does include:
*96, Barge In, set($Bar1,1)
Have you tried dialling that?
2. You have not indicated that you understood that if configuring the phone using the local onboard web server UI, you need to disable Obitalk provisioning. Otherwise any changes you try to make are immediately replaced by the settings on the Obitalk portal.
3. You did not answer my question "Are you trying to use an "intercom" facility that Nextiva provides ..." Are you trying to do https://www.nextiva.com/support/articles/how-to-setup-push-to-talk-as-an-admin.html ?
zipp:
Quote from: drgeoff on March 27, 2018, 06:32:02 am
1 i have tried using auto answer (enabled) but still extension when called only rings and i have to pickup to answer
2. You have not indicated that you understood that if configuring the phone using the local onboard web server UI, you need to disable Obitalk provisioning. yes i have it disabled
3. You did not answer my question "Are you trying to use an "intercom" facility that Nextiva provides ..." Are you trying to do https://www.nextiva.com/support/articles/how-to-setup-push-to-talk-as-an-admin.html ?
sorry yes i tried this already with nextiva support guy who worked with me but after setting up this way i tried to call *50 i get invalid number error call failed !!!!
Navigation
[0] Message Index
[#] Next page
[*] Previous page