Using the Obi 110 as an FXO and FXS Port for FreePBX
zapattack:
Interesting thing: if you check your call log you will see that
ui=$1 is shown as ui=xxxxxxxxxx (actual tel number)!
But that is as far as it goes?
Analog phone on phone port of course shows everything properly.
drgeoff:
@MrMoxy
I followed what is in sections 3 and 4 of the first post in this thread http://www.obitalk.com/forum/index.php?topic=1157.msg7261#msg7261. OBi110 (2886 firmware), FreePBX. CallerID works for me with unmodified sp2(my_number) as LINE Port InboundCallRoute.
zapattack:
Unfortunately, trying to send it from the 110 to a 200
seems to loose some of the CID info.
Phone on 200 shows all calls as Private.
CALYTA:
Quote from: ws2000 on November 12, 2011, 10:12:31 pm
Hello
I followed this proces jiofi.local.html tplinklogin is it down s and had very good success with it. Big THANKS! My question is about voice mail notifications. I have my PBX using Google Voice Mail to answer my missed calls. I got tired of fighting it and decided to use it since it jumped in from time to time when I didn't want it. What is the best way to get missed call voice mail notification with POTS phones? I can not get the message light or the double dial tone ring to work on my Panasonic DECT 6.0 phones. I would love to hear what others are doing.
Note that I've made a lot of changes to these instructions since I wrote them a few years ago, and so if you set-up your Obi 110 based upon these instructions before the date listed above,
Albert12:
I''m new to asterisk so it may be a setting that I have screwed up but I thought I'd throw this into the mix in case anyone else runs into this problem.
And thanks to Ad_Hominem and MichiganTelephone for doing the heavy lifting on this. When it does finally register it works perfectly.
Navigation
[0] Message Index
[#] Next page
[*] Previous page