How do you make OBi110 forward the caller ID too?
dialtone:
Ok, after applying the following ...
Quote from: RonR on July 13, 2011, 09:03:19 pm
Voice Services -> SP1 Service -> X_InboundCallRoute : {(xx.)>(xx.):sp2($1>9876)}
Voice Services -> SP1 Service -> CallForwardUnconditionalEnable : (unchecked)
Keep:
Service Providers -> ITSP Profile B -> SIP -> X_SpoofCallerID : (checked)
I rebooted the OBi110, but now inbound calls to my GV number 123-456-7890 do not even go to Asterisk.
The Asterisk SIP 9876 number does not ring.
But the caller can hear ringing and it eventually goes into my GV voicemail.
RonR:
Try just : {SP2(9876)}
RonR:
Call Status (while the call is in progress) and Call History (after the call has ended) can be be helpful to figure out what's going on.
dialtone:
So I am back to my original situation.
The inbound call from outside shows "4567" regardless of the actual Caller ID.
The Call History and Call Status do however show the correct Peer Number.
RonR:
Are you sure that Asterisk will accept CallerID from an extension? It doesn't make a lot of sense that it would. Can you reconfigure your SP2 -> Asterisk to be a trunk on the Asterisk side instead of an extension? Trunks definitely accept CalleriD.
Navigation
[0] Message Index
[*] Previous page