simulataneous calls
bruss:
Ron could i use this process to connect my LINKSYS SPA9642NA Ip Phone and Cisco 7960?
Quote from: RonR on July 18, 2011, 04:21:16 pm
There's no LINE Port connection involved and no use of the Auto Attendant.
For incoming calls:
Voice Gateway5 communicates with the PAP2 via SIP, not the LINE Port. The SP1, SP2, and LINE Port InboundCallRoute's ring both the PHONE Port and the PAP2 with a {ph,vg5(pap2)} rule. The PAP2 is configured to answer calls without registration.
For Outgoing calls:
SP2 is configured for a SIP Provider. The PAP2 is configured with the OBI's IP address and port 5061 for its SipProxy (without registration and make calls without registration).
More can be found here:
http://www.obitalk.com/forum/index.php?topic=718.0
RonR:
I'm not familiar with those devices, but I would assume so.
bruss:
so if i put my ipphone on vg1 with a name 7960 would my InBoundCallRoute be:
{7960>911:sp2},{7960>**0:aa},{7960>***:aa2},{7960>(<**1:>(Msp1)):sp1},{7960>(<**2:>(Msp2)):sp2},{7960>(<**3:>(Mvg3)):vg3},{7960>(<**4:>(Mvg4)):vg4},{7960>(<**6:>(Mvg6)):vg6},{7960>(<**7:>(Mvg7)):vg7},{7960>(<**8:>(Mli)):li},{7960>(<**9:>(Mpp)):pp},{7960>(Mtg1):tg1},{ph,vg1(7960)}
RonR:
Yes, assuming:
1. Your ipphone's username is 7960.
2. You want 911 to go out SP2.
3. Your PrimaryLine is Trunk Goup 1.
Note: The {7960>(<**3:>(Mvg3)):vg3},{7960>(<**4:>(Mvg4)):vg4},{7960>(<**6:>(Mvg6)):vg6},{7960>(<**7:>(Mvg7)):vg7} rules are there because I have SIP providers on VG3, VG4, VG6, and VG7.
bruss:
so i took out the stuff you have i dont nee ie the other vg's
{7960>911:sp2},{7960>**0:aa},{7960>***:aa2},{7960>(<**1:>(Msp1)):sp1},{7960>(<**2:>(Msp2)):sp2},{7960>(<**3:>(Mvg1)):vg1},{7960>(Mtg1):tg1},{ph,vg1(7960)}
Right now i can call out but the phone isnt ringing?
Navigation
[0] Message Index
[#] Next page
[*] Previous page