Localphone on sp2

(1/2) > >>

N7AS:
I am having problems trying to get localphone (US Washington DID) to work on my Obi110.

Here is what I have at present:

sp1  > Google Voice 1 (Primary)
sp2  > Google Voice 2
Line > PAP2T Line 2 > localphone (outbound TollFree 800/855/866/877/888)

This works ok...

I do all my programing manually and have provisioning desabled.

This is what I want to do:

sp1 > Google Voice 1 (primary)
sp2 > localphone (outbound TollFree 800/855/866/877/888)
Line > PAP2T Line 2 > (some other provider)

When I try to program localphone into sp2, I can't receive any calls to the localphone DID or place outbound calls through localphone even by preceding the call with **8.

I want to be able to set the OBi110 this way so I can have acces to the Voice Gateways.

Any ideas?

 

RonR:
Quote from: N7AS on July 16, 2011, 02:38:16 pm

When I try to program localphone into sp2, I can't receive any calls to the localphone DID or place outbound calls through localphone even by preceding the call with **8.


Is SP2 Service Status showing registered?  You'll need registration to receive calls.

For LocalPhone on ITSPB/SP2, did you remember to set?:

Voice Services -> SP2 Service -> X_ServProvProfile : B

Outgoing calls on SP2 are : **2 + number

N7AS:
I will have to have another go at it.
I think I really meant **2 + number.

I did back-up my present settings and have restored a few times already trying to get this to work.

RonR:
Starting from all Default vaues on Service Providers -> ITSP Profile B and Voice Services -> SP2 Service:

Service Providers -> ITSP Profile B -> SIP -> ProxyServer : (localphone proxy server)

Voice Services -> SP2 Service -> X_ServProvProfile : B
Voice Services -> SP2 Service -> AuthUserName : (localphone username)
Voice Services -> SP2 Service -> AuthPassword : (localphone password)

Physical Interfaces -> PHONE Port -> Primary Line : (default trunk for calling)

If you make these changes to the OBi locally by logging into the IP address returned by dialing ***1:

System Management -> Auto Provisioning -> Auto Provisioning -> Method : Disabled

N7AS:
This is the sp2 status:

Register Failed: No Response From Server (server=94.75.247.45:5067; retry in 25s)

I set a register server to localphone.com
maybee I will take that out as I have that set for the proxy server.

Navigation

[0] Message Index

[#] Next page