Localphone on sp2
N7AS:
Now I'm getting...
Retrying Register (server=94.75.247.45:5067)
RonR:
Quote from: N7AS on July 16, 2011, 03:17:29 pm
Register Failed: No Response From Server (server=94.75.247.45:5067; retry in 25s)
Why are you using port 5067 instead of 5061?
N7AS:
I was using port 5067 as I have a Cisco/Linksys IP Phone that was using 5062 through 5065 and wanted to move it out of the IP phones range.
I have since moved the IP phone's ports up a couple of notches and then set the Obi's sp2 to port 5061 and then I still get this in the status...
Retrying Register (server=94.75.247.45:5061)
RonR:
Others have successfully used LocalPhone on the OBi.
Does your router have ALG support, and if so, make sure it's disabled.
If you're configured as I posted above, you might consider connecting the OBi directly to your broadband modem and see if you can call out through LocalPhone. Make sure your can reach **9 222 222 222 first to make sure the OBi is connected to the Internet.
N7AS:
I disabled ALG and still get this status...
Retrying Register (server=94.75.247.45:5061)
The OBi works fine with Google Voice sp1 as it did before I disabled ALG in the router. I never had any problems. But when I wanted to replace the second Google Voice in sp2 with a sip provider I now have problems with sp2.
I even changed ServiceProviders > ISTP Profile B > SIP > RegistrarServer to localphone.com and then without it. Same result...
Navigation
[0] Message Index
[*] Previous page