Softphone already registered but can't make other softphone ring

<< < (2/2)

azrobert:
This is how I configured my OBi200.

ITSP Profile C

SIP/ProxyServer - 127.0.0.1
SIP/X_SpoofCallerID - checked (enabled)

SP3 Service
X_ServProvProfile - C
X_RingProfile - B
X_RegisterEnable - Unchecked (Disabled)
X_Proxy - checked (enabled)

AuthUserName - 1002
AuthPassword - 1234567

X_InboundCallRoute - {>1001:SP4(1001@local_client)}
or
X_InboundCallRoute - {>1001:SP4(1001@192.168.30.114:5060)}

---------------------

ITSP Profile D

SIP/ProxyServer - 127.0.0.1
SIP/X_SpoofCallerID - checked (enabled)

SP4 Service
X_ServProvProfile - D
X_RingProfile - B
X_RegisterEnable - Unchecked (Disabled)
X_Proxy - checked (enabled)

AuthUserName - 1001
AuthPassword - 12345678

X_InboundCallRoute - {>1002:SP3(1002@local_client)}
or
X_InboundCallRoute - {>1002:SP3(1002@192.168.30.117:5060)}

Everything else (including DigitMaps) at default

azrobert:
I never configured my OBi200 with the address of the destination in the ProxyServer. It will probably work, but I'm not sure. When I use the IP address I put it in the inbound route. The above config shows both inbound route options. Your version and mine with IP address will not work because CSipSimple assigns a random port number, so port 5060 will fail. You can configure CSipSimple to have a static IP port of 5060.

From the CSipSimple keypad tap Menu on the phone
Tap Settings
Tap Menu again
You need to be in Expert mode
If the 2nd option says "Normal mode" you're in Expert
Tap "Expert Mode"
Tap Network
Tap UDP Port
Enter 5060
OK

Navigation

[0] Message Index

[*] Previous page