I am trying to get 411 (18002464411) working on SP1 (Google Voice)
SP1 - Google Voice (Primary)
SP2 - Localphone DID (Free incoming + TollFree outbound)
I origionally had...
Service Providers > ISTP Profile A > General > DigitMap
(*xx|<411:18002464411>|<**2>18(00|88|77|66|55)xxxxxxx|<**21>8(00|88|77|66|55)xxxxxxx|![01235678]11|1[2-9]xx[2-9]xxxxxx|<:1>[2-9]xx[2-9]xxxxxx|<:1360>[2-9]xxxxxx)
I was getting an error message, so I took it out of the above DigitMap and added it to the begining of...
Physical Interfcaces > PHONE Port > OutboundCallRoute as
{(<411:18002464411>):sp1},{([1-9]x?*(Mpli)):pp},{(<911:1360xxxxxxx>):sp1},{(<#:>):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
which didn't work either. However the 911 backend number worked ok in this DigitMap.
I have since removed the 411 string from both DigitMaps.
What is the proper way to add 411?
also...
is the way I have added TollFree calling to go out SP2 the correct way in...
Service Providers > ISTP Profile A > General > DigitMap or should I add it to..
Physical Interfcaces > PHONE Port > OutboundCallRoute ad if so what is the best way to do this?
I do now have access to VoiceGateways as SP2 is now a SIP provider.