Using SipToSis to Make and Receive Skype Calls Through an OBi
JoeinForum:
Thanks again RonR for your help.
Yes, I had done those two things and have now inserted the bold text into the phone port - digimap as your the original post indicated. Now I get further with calling out. When I dial from my handset... skype opens on my computer and actually dials the number I call. But then nothing happens and it finally disconnects. In coming calls have the same problem as before
I will detail what I have done so far- possibly something obvious missing
Download and extract SiptoSis - modified two files
Add Skype UserID's as Speed Dials in SkypeOutDialingRules.props:
Add the OBi's SP2 IP address (obtained from my router DHCP) in SkypeToSipAuth.props
*,sip:siptosis@192.168.0.105:5061,MYSkypeUserID
Went to OBI dashboard selected second item
SP1 is google voice: Here it says "connected"
SP2 edited with the following: Here it says "Register Failed: 501 Not Implemented (server=127.0.0.1:5061; retrying)"
SP proxy server: 127.0.0.1
SP proxy server port: 5061
Outbound Proxy Server: blank
Outbound Proxy Server Port: 5061
User Name: skypename
Password:skype passwd
URI : blank
Then went into OBI Expert and
1. Physical Interfaces -> PHONE Port -> DigitMap : ...|#1(Mvg8)|(Mpli))
Physical Interfaces -> PHONE Port -> OutboundCallRoute : ...,{(<#1:>(Mvg8)):vg8},{(Mpli):pli}
2. Voice Services -> Gateways and Trunk Groups -> Voice Gateway8:
I've literally written whats in the quotes
Name : "SipToSis"
AccessNumber :"SP2(192.168.0.104:5070)" 104 is my laptop
DigitMap : "(xx.)"
AuthUserID : "skypests"
3. ITSP Profile B SIP did the following as per yourpost
Service Providers -> ITSP Profile B -> SIP -> ProxyServer : 127.0.0.1
Voice Services -> SP2 Service -> X_RegisterEnable : (unchecked)
In this section:
Here ProxyserverPort and OutBoundProxyPort are 5061
RegistrarServerPort is 5060
4. Under Coiver service sp2
Voice Services -> SP2 Service -> AuthUserName : skypename
Voice Services -> SP2 Service -> X_ServProvProfile : B
RonR:
I've got to run out for a while, but let me throw a couple of things out...
SP2/ITSP Profile B should have ALL settings at Default except for:
Service Providers -> ITSP Profile B -> SIP -> ProxyServer : 127.0.0.1
Voice Services -> SP2 Service -> AuthUserName : (put anything here)
Voice Services -> SP2 Service -> X_RegisterEnable : (unchecked)
Voice Services -> SP2 Service -> X_ServProvProfile : B
SP2 status should show : Registration Not Required
Physical Interfaces -> PHONE Port -> DigitMap:
([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|911|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|#1(Mvg8)|(Mpli))
Physical Interfaces -> PHONE Port -> OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},
{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(<#1:>(Mvg8)):vg8},{(Mpli):pli}
JoeinForum:
Thanks again RonR, I'm posting my latest situation here and will wait till you get back. Thanks again for all your help in trying to get this sorted out. Its highly appreciated.
To answer your last post ...Yes, I have all that as you have instructed.
Except this...
SP2 status should show : Registration Not Required
When I first enter the Device Configuration page I have two entries under Voice Services
Sp1 is google
and sp2 is what I am working on. I am not sure what the settings should be for that... when I click edit and am taken to a new menu
SP proxy server: 127.0.0.1
Service Provider Proxy Server Port: should this be 5060 or 5061
Outbound Proxy Server: blank
Outbound Proxy Server Port:should this be 5060 or 5061
User Name: skypename
Password:skype passwd
URI : blank
These seem to populate the SP2/ITSP Profile B at least as far as choosing 5060 or 5061
RonR:
You need to be making all these changes from the OBi Expert area if you're using the OBiTALK Web Portal. I don't use the OBiTALK Web Portal as I feel it's more work than simply configuring the OBi directly, so you're on your own with it. If you should decide to configure the OBi directly, you must disable Auto Provisioning:
System Management -> Auto Provisioning -> ITSP Auto Provisioning -> Method : Disabled
Whichever route you take, all Service Providers -> ITSP Profile B and Voice Services -> SP2 Service settings should have the Default box checked except for the ones I noted.
JoeinForum:
I see... I was starting to wonder if that was where you were configuring it from. Yes, I was in the expert area.
But now, I have done this
System Management -> Auto Provisioning -> ITSP Auto Provisioning -> Method : Disabled
and will attempt to configure directly as per your suggestion.
Need to take a break and come at this fresh. Will post more tomorrow. Thank you again for all your assistance. Hopefully, if I can get this to work will make a detailed set of instructions suitable for other newbies.
Navigation
[0] Message Index
[#] Next page
[*] Previous page