New unannounced OBi Phone firmware / OBiPhone bug discussion
Mango:
Quote from: WelshPaul on October 25, 2016, 02:05:38 am
I would use the OBi1032 as my primary phone but sadly the OBi1032 doesn't match an inbound calls CLI to that saved in the phones phonebook.
That's a shame. I didn't notice that but I tested just now and you are correct. The phone does display the picture, so I know it found the correct record. I tried populating both the Name and First/Last fields. The manual says this:
Quote
Caller’s name and number are displayed on the screen when available. When only the caller number is available, the phone will attempt to match the number against the phone book or buddy list to find a corresponding entry. If one is found, it uses the name and picture from that entry to display on the screen.
Hopefully this is something that can be solved. Although it should work whether or not a name is available with the call (like other phones do) I did test with and without.
Edit to add: the name IS displayed if I make an outgoing call to a number in the phone book.
WelshPaul:
I have reported the issue many times, mainly before the phone was released during beta testing. I even informed Sherman directly during a phone call once the IP phone had been publicly released and was told "he'd look into" it but unfortunately to date it has never been addressed.
Never before have I come across a phone that couldn't do this until I obtained an Obi1032. It's even been mentioned on this forum in the past. Sadly my OBi1032 sits gathering dust only to be brushed off once in a blue moon. Probably one of the reasons why the OBihai IP phones are no longer sold in the UK.
Mango:
Found another bug in 3806 and above (but not earlier).
If the screen saver is on, (I use Turn Off Display) and you press a digit, two digits appear on the screen: one for the keypress and one for release.
WelshPaul:
New firmware versions have been uploaded...
http://fw.obihai.com/OBiPhone-5-0-3-3902.fw
http://fw.obihai.com/OBiPhone-5-1-3-3902.fw
Mango:
Thanks Paul. You found the new versions before I did this time!
Tentatively, 722 ringtones seem to be working. I made about 20 test calls using the same method as before and did not observe any problems. The http://fw.obihai.com/Release_Notes_Phone_5.0.3.3902.pdf release notes don't mention this, so maybe it was fixed by coincidence, or maybe it was related to the 3.5mm or RJ9 headset bug (I don't have a headset).
Incoming calls do not display name from phone book bug is still present.
Two digits appear when one is pressed while screen saver is on bug is still present, though I only reported that a few days ago, so it is a little premature to expect that to be fixed already.
nmap scan on the phone no longer causes the phone to reboot. I didn't post about this before because I just discovered it. It still causes loss of audio. It seems very easy to DoS this phone, although since it's designed to be used behind a firewall, that shouldn't be a huge concern.
Navigation
[0] Message Index
[#] Next page
[*] Previous page