Caller ID Settings
bsdaiwa:
I am setting up an OBi 110 in Argentina and I am not sure what the correct settings are for this countries Caller ID. If someone knows can you let me know? The second question on this issue is, do I need to set the Phone setings (FSK Bell 202) to the same method as the Line settings (FSK V.23). The phone I am using is a USA cordless phone so I am not sure if I need the phone set for FSK Bell 202 or FSK V.23.
drgeoff:
You asked part of this question some months ago when you said that you thought that Argentina uses FSKD. I suggested you try FSK on the OBi. Googling does not yield what FSKD means. Perhaps the 'D' means Dual-tone which is one method of signalling that the FSK data is following. You did not reply to that post. On the LINE port Try FSK with Bell 202 and V.23 and see if either works for the OBi to get the incoming CallerID.
There is no requirement to set the methods on the LINE and PHONE ports to the the same. If using a USA sourced phone I would try the FSK Bell202 and After first ring combination of settings on the PHONE port.
bsdaiwa:
Thanks, sorry about the prior post, was traveling and forgot about it. I will give each setting a try and let you know the results.
Thanks again
bsdaiwa:
Now in Brazil and still can't seem to get Caller ID working in either country. I found a document put out by Cisco for there old SPA-400 but there doesn't seem to be a match for what the OBi lists. For Argentina they say European(FSK) and Brazil they say ETSI DTMF. Can anyone "translate" the Cisco description to OBi settings?
If anyone is interested here is the link to the Cisco documentation: https://supportforums.cisco.com/document/36976/spa400-caller-id-localization-configuration
drgeoff:
Quote from: bsdaiwa on November 14, 2016, 02:56:54 am
Now in Brazil and still can't seem to get Caller ID working in either country. I found a document put out by Cisco for there old SPA-400 but there doesn't seem to be a match for what the OBi lists. For Argentina they say European(FSK) and Brazil they say ETSI DTMF. Can anyone "translate" the Cisco description to OBi settings?
If anyone is interested here is the link to the Cisco documentation: https://supportforums.cisco.com/document/36976/spa400-caller-id-localization-configuration
European FSK. Try FSK(V.23)
ETSI DTMF. Try the two DTMF options on the OBi but note the " I've read that there are in fact 5 varieties of DTMF system, with the Brazilian version being particularly weird." sentence in https://web.archive.org/web/20150214083456/http://www.ainslie.org.uk:80/callerid/cli_faq.htm.
Navigation
[0] Message Index
[#] Next page