Quote from: hogfanboy on July 20, 2011, 10:46:53 PM
I try dialing slow or fast or pausing after the **8, I can't figure out how to consistently get it to work. It just randomly works some times.
The OBi collects the whole number before it takes the landline off-hook and dials the number out the LINE Port, so pausing while you're entering digits is not likely to help.
You might try increasing the following setting in case the OBi is dialing too soon after going off-hook:
Physical Interfaces -> LINE Port -> DialDelay : 500
If that setting isn't the problem, it may be the OBi is sending the DTMF digits out the LINE Port a little too fast for your telco. You might trying increasing the following two settings to see if it helps:
Physical Interfaces -> LINE Port -> DialDigitOnTime : 200
Physical Interfaces -> LINE Port -> DialDigitOffTime : 200
I'd double both of them to 400 and see if it fixes the problem. If it does, you can experiment with values between 200 and 400 to find a smaller number that still works reliably.