Call Centric w/ multiple SIP devices connected?
Taoman:
Quote from: Ember1205 on November 05, 2016, 11:27:29 am
I tried Linphone and was able to switch to either TCP or TLS - both resulted in the SIP client not being able to connect. ZOIPER might be blocking access to the TCP setting because it maybe doesn't work with CC?
Perhaps you are correct. I was unable to get my OBi to register with CC using TCP. I was going by this page:
Quote
Protocol = UDP or UDP/TCP
http://www.callcentric.com/faq/9/226 I guess I don't know what "UDP/TCP" really means.
If so, I would recommend you set the keepalive settings that azrobert referenced.
In Advanced Configuration on the Obitalk web portal, go to:
Voice Services-->SPx Service
Set the 2 parameters as Callcentric suggests. You must uncheck both boxes to the right of the respective fields in order to be able to edit them. Once edited, save and submit.
azrobert:
On the OBi use OBi Expert
Voice Services -> SPn Service
X_KeepAliveEnable: Checked
X_KeepAliveExpires: 120
These settings fixed my problem of losing registration to a different provider. I used 60 for the expiration.
Ember1205:
Keepalive was not enabled for SP2 (CC), so I set it to Enabled and used 120 for the interval. I'll monitor and see what comes of it.
Thanks.
Navigation
[0] Message Index
[*] Previous page