January 04, 2022, 08:25:16 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: SIP registration timeout parameter name?  (Read 4679 times)
JimD
Newbie
*
Posts: 2


« on: November 14, 2016, 08:03:26 am »

I continue to experience frequent up/down state changes on my Obihai 202+Anveo configuration

From Anveo Support: "I checked your current SIP status and it shows that your device is currently using about 35 seconds registration timeout (way too low). As a general note, SIP registration timeout should be configured to be around 180 seconds (not 35 seconds). "

What is the name of that parameter(SIP registration timeout) in the OBI Expert configuration? (I have Anveo on SIP A)
Logged
Mango
Hero Member
*****
Posts: 550


« Reply #1 on: November 14, 2016, 12:57:54 pm »

Service Providers >> ITSP Profile A >> SIP >> RegistrationPeriod: 360

Note that the OBi registers at half the RegistrationPeriod.  So, to configure it to register every 180 seconds, set RegistrationPeriod to 360.
Logged

Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC

Advertisement
Advertisement