Anveo for CAN & Google Voice for US and Itl

<< < (4/6) > >>

azrobert:
Again, I don't see the problem. The following are wild suggestions and shouldn't make a difference.
 
Are you using the current firmware? I think its build 5285.
 
Try adding SP2 to the outbound route:

{(Msp1):sp1},{(Msp2):sp2},{([1-9]x?*(Mpli)):pp},{(<##:>):li},{(<**70:>(Mli)):li},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**9:>(Mpp)):pp},{(Mpli):pli}

Remove 900 numbers:
ITSP B DigitMap:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.)

If it still doesn't work, remove SP1 from the outbound route. Are all numbers now routed to SP2?

{(Msp2):sp2},{([1-9]x?*(Mpli)):pp},{(<##:>):li},{(<**70:>(Mli)):li},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**9:>(Mpp)):pp},{(Mpli):pli}

illicit:
Firmware is updated to max. I even did it manually. But it's not the same build number as yours. Mind if you can send me yours (probs beta) since I really want this to work :(

Adding {(Msp2):sp2} didn't solve it.

And you are correct, once I remove {(Msp1):sp1} it routes all calls through SP2 (Google Voice).

We're close just no idea why it's this frustrating.

Could the box be faulty?

Edit: How about editing DigitMap for Phone 1?


Edit 2:

ITSP A DigitMap:
(1905xxxxxxx|1289xxxxxxx|1647xxxxxxx|1416xxxxxxx|1519xxxxxxx|1613xxxxxxx|1705xxxxxxx|1807xxxxxxx)

ITSP B DigitMap:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|!1900xxxxxxx|!900xxxxxxx)

Phone 1 DigitMap:
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|##|**70(Mli)|**8(Mbt)|**81(Mbt)|**82(Mbt2)|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**9(Mpp)|(Mpli))

Phone 1 OutBoundCallRoute:
{(Msp1):sp1},{(Msp2):sp2},{([1-9]x?*(Mpli)):pp},{(<##:>):li},{(<**70:>(Mli)):li},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**9:>(Mpp)):pp},{(Mpli):pli}

drgeoff:
Quote from: illicit on November 20, 2016, 09:47:19 am

Could the box be faulty?

Not impossible but very, very, very, very unlikely.

Is the Phone Port Digit Map at its default?

illicit:
Yes it is at default.

drgeoff:
And under Voice Services, SP1 Service, X_ServProvProfile is definitely set to 'ITSP A'  ?

Navigation

[0] Message Index

[#] Next page

[*] Previous page