Not Getting a Dial Tone
asim911:
My Obi 110 was working fine & all sudden I am not getting any dial tone. Its getting a kind of echo when I turn on my phone. I updated with recent firmware & rebooted several time but no luck. Any help/suggestion will be highly appreciated.
Thanks
RonR:
Try a different telephone connected to the PHONE Port. The OBi should provide dialtone even if set to factory defaults and totally unconfigured. If it doesn't and it's not the telephone, then the OBi must have failed.
asim911:
I tried different phone but the same result. One thing I notice that the light of internet on Obi device is blinking. When it was working this light become solid green.
Seems like the device has malfunction.
lhm.:
Disconnect power for 15minutes, then power up.
Worked for me.
hokila:
I have similar issue last night with my obi100. Spent 2 hours with no luck. I tried again this morning and the problem presented after I set up my google voice (add device, input google info, etc.) then the phone light keep blinking even after I took the phone line off. Here are what I did:
step 1-connect phone, internet, and power (normal, two solid lights)
step 2-dialed **9 222 222 2222 (normal, can hear echo but fuzzy)
step 3-add a device (successfully done)
step 4-add a google voice number (the phone light keep blinking even after I took the phone line off. With the phone line on, there was no dial tone at all).
This was the second installation after the official update. Tried unplug the power for 15 min, but it worked only for a while.
Any suggestion?
Navigation
[0] Message Index
[#] Next page