speed dial numbers now give no service configured error
MikeGJ:
using google voice on SP1, I rarely use speed dial but yesterday I noticed its giving me the no service configured error; calls out are OK; most of my speeddials are international, and I can dial the number manually fine and the call goes through - just if I try to use speeddial to call the number do I get the no service configured error. Looks like I last used it Jan 2016. Used to have DSL but recently switched to cable for internet - no idea if that has anything to do with it. Am running 1.3.0 build 2886 so thats the latest and last update.
any thoughts/suggestions would be appreciated
thanks
Mike
MikeGJ:
looks like I forgot to mention this is on an OBI110
drgeoff:
Nothing to do with the change of internet access.
Log in to the 110's local management pages. Click on Status then on Call History to see what numbers the speed dials are calling and the SP they are being routed to.
azrobert:
When a speed dial is defined with just a phone number, it is processed the same as dialing the number from the phone port and should work the same. The phone DigitMap validates the number and the OutboundCallRoute routes the call.
I suspect your configuration got corrupted. This is rare, but it does happen. I helped two people by redefining the code in a different place, DigitMap defined as a User Defined DigitMap. This also happened to me and I fixed it by doing a factory reset and redefining everything from scratch.
I have 2 suggestions:
1) Define the call in a different speed dial number.
2) Define the speed dial as: sp1(18005551212)
When defined this way, the DigitMap and OutboundCallRoute processing is bypassed and the call is routed directly to SP1.
MikeGJ:
thanks - I've tried both and it hasnt helped. I'm guessing something was corrupt somewhere as while I was trying to fix it my default for phone port kept resetting to default and PTSN, even if I changed it back to SP1.
tried changing speeddial to sp1(xxxx) but that didnt work (still get no service configured error
reset to factory default, and logged in to obidashboard - where I had to reconfigure device - it still seemed to have my GV as sp1 but not connected, and reconfiguring installed GV again as sp2.
Oddly my speeddials were still present on the dashboard, but not on obi interface; deleted from dashboad and put new ones back; I can direct dial the numbers but using e.g. 4# I still get the same service not configured message for the number I get connected with when I manually dial it! trying to use a speeddial with no number associated also gives me the same no service configured error.
basically SP1 is now not configured, SP2 is GV and checking obi interface, primary line is SP2 as well. dialled calls go out, speed dials still no service configured....
Navigation
[0] Message Index
[#] Next page