OBI in Europe - issues
LeftRight:
Would you be a bit more specific? what has been fixed? and what is still remained a problem?
Fabri:
Hi, thanks for your help!
I issue a service ticket with this:
"Hi, I bought an OBI110 (#200xxxxxx) in the States last week and I'm having few issues in making it working here in Spain.
It is configured this way:
- voip service via mydivert.com (SIP trunking and call waiting enabled)
- cordless phone (Siemens GIGASET C300)
- no line port (also my standard line is voip)
- I used configuration recommended here by LeftRight (forum):
"You may try this tone pattern for PSTN disconnect detect in spain ...
Go to: Physical Interface -> LINE Port -> PSTN Disconnect Detection -> DisconnectTonePattern
425-18;10;(.25+.25)
Also, your AA answering issue might be related to CallerID detection, (Spain uses ETSI FSK, which is different from US)... use option "FSK(v.23)" in Physical Interface -> LINE port -> Port Settings -> CallerIDDetectMethod "
Issues I'm experimenting:
- AA works completely random; sometime it starts, sometime it's just ignoring calls
- No call is passed to PHONE line even if it is received by OBI (green led blinking...)
- Caller and called number are identified correctly by the system
- I can call normally from cordless phone even if I've a certain delay in dialing
This is a great device, I'd really appreciate your help in fixing configuration starting from factory reset on...
Thanks a lot,
rgds
OBiSupport:
Hi Fabri,
We have replied to your Email about this issue you are having.
Our Support team will continue this thread via Email.
Sincerely
-Obihai Support Team
Fabri:
All,
thanks for prompt answers to this great support team!
OBI was working just fine (I was not using pstn line)- but there was a conflict between SIP port 5060 used by my router (this port was used by my home "landline"- also VOIP as many in Europe) and OBI's, also set on 5060.
I just changed OBI's port and now it works just fine!
thanks
Navigation
[0] Message Index
[*] Previous page