Dialing plan to add **9 prefix for OBi calls, on ATA with SIP service

[xts431]

Hi all,

I'm using a handful of OBi110/100 boxes. Everything working smooth.

One of the boxes has a SIP service configured on SP1. Service working fine. In addition to placing PSTN calls, I can call the other boxes via OBiTalk if I prefix the calls with **9.

What I'd like to do is add a dialing plan which adds **9 to outgoing calls starting with 200 or 300, on the box I have the SIP service configured on. (I can set the PrimaryLine as OBiTalk on the non-SIP-configured boxes, so no need to do this on them).

I want the ability to do a call return (from caller ID list on phone) to the OBi number that has called me. Currently, calls cannot be direct-dialed from the caller ID list, as they must be prefixed with **9.

Thank you for any assistance you may provide me.

[drgeoff]

Modify the PHONE Port Digit Map by inserting <**9>[23]00xxxxxx| immediately after the first (.

[xts431]

Modify the PHONE Port Digit Map by inserting <**9>[23]00xxxxxx| immediately after the first (.

That worked perfectly. Thank you!