ObiTalk with Cisco IP Phone

<< < (4/4)

SteveInWA:
Great news!

Yeah, I've been using GN Netcom/Jabra headsets since the mid-1990s, starting with corded, and then one like yours, then the next model, and now the 9470 with EHS on a 1032.  It really is the best way to use a business-class phone.  My favorite thing is to wander around the house while on the phone, vs. sitting on my butt.  I don't know about the older model you have, but the 9400 series has such long range, I can go outside, walk past my next-door neighbor's house, and still be on a conversation.

I'm glad we got it documented here, in one place.  Thanks for the diagram.

JQOBi1000user:
I had a factory OBI-EHS cable, which I used with a 2182, I needed a second for another 2182 (Amazon had them for $49!).  Well I can't find it, they don't make it, and if I wanted it, I had to make it.  So here is a diagram that worked for me with an Poly OBI2181, Poly SAVI 740, a Poly APS-11, and this cable.  Take a RJ-45, I suggest a female keystone jack if you use the APS-11 since its a male RJ-45.  On the other side you need a RJ-9 and an RJ-11 male to insert into the AUX and headset jack of the OBI2182 (other OBI phones should work as well if they worked with the OBI-EHS).  I also suggest you get some shrink wrap.  Hopefully the picture works, but here is the information in TEXT format.  I doubt you need to do a T-568 wiring or any twists really, but since I used existing RJ-45 diagram, I used T-568B.

RJ-45
1-3 (RJ9)
2-2 (RJ9)
3--4 (RJ11)
4--3 (RJ11)
5--2 (RJ11)
6--1 (RJ11)
7-1 (RJ9)
8-4 (RJ9)

Navigation

[0] Message Index

[*] Previous page