Problem with OBI110 and GVoice

<< < (2/2)

rupnok:
OK.  Switched the router port and cable.  Now The router and obi110 are communicating with each other, but I still do not have service.

OBiSupport:
Quote from: RonR on July 28, 2011, 01:52:19 pm

You might try a different Ethernet cable.

You might try a different Ethernet port on your router.

You might try a different router or try the OBi on a friends network.

You might try resetting the OBi to factory defaults using the reset button on the under side of the OBi.  Hold it depressed with a paper-clip for an extended period of time until the OBi reboots.


Thanks, RonR,

If you still experience problem of getting service, please contact us at support@obihai.com, we will help you out.

rupnok:
Don't know why but everything works now.  Thanks to everyone.

seabass:
I am having the same pb described.  Dial tone but a blinking line.  I ***1 and was told the IP address is not available and the DHCP is unable.  I plug my computer through the same internet line and it is working.  I try other outlet, no success.  Anybody can help?  Thank you.

Navigation

[0] Message Index

[*] Previous page