Obi200 custom setting getting overwritten

<< < (2/2)

azrobert:
From the OBiTalk Dashboard click the gear ICON to the right of your OBi200.
Click OBi Expert Configuration.
Under Manage Expert Configuration click browse, find your backup and open.
Click Import Config.
Now OBiTalk will have your custom config.

Locally enable OBiTalk Provisioning.
System Management -> Auto Provisioning
Under OBiTalk Provisioning
Method: Periodically

In OBiTalk define the GV trunk.

Make any new configuration changes from OBi Expert.
If you want to make configuration changes locally, disable auto provisioning.
System Management -> Auto Provisioning
Under OBiTalk Provisioning
Method: Disabled

djjazzy28:
Thanks for posting the order in which to setup GV with custom saved configs.  I've got it working just the way it's been working the past 2-3 years, with the addition of a 2nd GV account on SP4.  Now when I log in to Obitalk and see my  dashboard, SP1 & SP4 show GV 'connected'.  SP2 & SP3 show 'not configured. Yet I do have SP2 configured for a SIP account which is connected and working.  It just does not show on the Obitalk dashboard. So am I to just leave the Obi200 on the dashboard? If I remove it, all setting will dissapear, right?  You mentioned that I can make changes locally by disabling auto provisioning, or via OBi Expert through the portal.  So any time I need to add or take away GV, I need to use the Obitalk portal, right?  And changing just GV credentials will not have an effect on my custom configs?  Again thanks for the walkthrough, as everything seems to be working just as before.  Went nearly the entire weekend with no service via GV both incoming and outgoing.

Navigation

[0] Message Index

[*] Previous page