SOLVED OBI200 and Cisco SPA303
bobocat:
Hi guys,
I have tried this, but the obi SP4 config seems to revert to default a few minutes after reboot.
Any ideas on what might be going ong?
I'm trying to make this work with a CP-9971, and have put dialplan.xml and SEP***.cnf.xml on to the tftp server...
drgeoff:
Quote from: bobocat on October 03, 2019, 11:59:58 am
Hi guys,
I have tried this, but the obi SP4 config seems to revert to default a few minutes after reboot.
Any ideas on what might be going ong?
I'm trying to make this work with a CP-9971, and have put dialplan.xml and SEP***.cnf.xml on to the tftp server...
Almost certainly you need to read and understand http://www.obitalk.com/forum/index.php?topic=61.msg109#msg109
CALYTA:
Quote from: azrobert on March 05, 2017, 08:03:27 am
You can have as many routing r Tutuapp 9Apps ShowBox ules in the inbound route as you want. The 1st parm (OBi200) in a rule is optional and is checking for the UserID of the sending device. This is only needed for security. The ">" separates the parms. The 2nd parm is checking the outbound number and on a match the call is routed to the specified destination. Processing moves left to right and ends with a match.
{>0:ph},{OBi200>911|933:sp2},{OBi200>(Msp1):sp1}
Zero will be routed to the OBi200 phone port
911 and 933 routed to SP2
Any number matching the SP1 DigitMap routed to SP1
The default SP1 DigitMap has rule "xx." that will match any dialed number, so all other rules must be placed before the (Msp1) rule.
I have drilled though everything I can locate on the web, and have managed to get the Cisco to work 50%..iow I can receive inbound calls to my GV number on the Cisco.
zaelkaleem:
Quote from: Radioman991 on March 04, 2017, 09:16:48 am
Hello:
I have a functioning OBI200 device, and a Cisco SPA303 IP phone.
I have drilled though everything Speed Test Scrabble Word Finder Solitaire I can locate on the web, and have managed to get the Cisco to work 50%..iow I can receive inbound calls to my GV number on the Cisco.
Outbound, a different story...as I get dial tone, but all outbound calls simply ring the phone on the analog phone port...never leave the building..no matter what number I dial.
Any insight would be appreciated.
I get a dial tone on the IP Phone but am not able to make or receive calls from it. Does anyone have the same setup and how exactly did you get your google voice to work with the IP Phone?[/u]
robinjamess:
Quote from: zaelkaleem on December 20, 2019, 04:23:59 am
Quote from: Radioman991 on March 04, 2017, 09:16:48 am
Hello:
I have a functioning OBI200 device, and a Cisco SPA303 IP phone.
I have drilled though everything TcsWebmail DadeSchools Upsers
I can locate on the web, and have managed to get the Cisco to work 50%..iow I can receive inbound calls to my GV number on the Cisco.
Outbound, a different story...as I get dial tone, but all outbound calls simply ring the phone on the analog phone port...never leave the building..no matter what number I dial.
Any insight would be appreciated.
I get a dial tone on the IP Phone but am not able to make or receive calls from it. Does anyone have the same setup and how exactly did you get your google voice to work with the IP Phone?[/u]
my phone is complete dead
Navigation
[0] Message Index
[#] Next page
[*] Previous page