Bridging Landline to Softphone?

(1/3) > >>

Tack:
From some key advice from Ron I was able to change routing strings to get my incoming Google Voice calls to ring my Obi110-attached phone, as well as a 3CX softphone, using the ObiApp for PC.

Now, I am wondering if there's any way to have incoming landline calls also ring my 3CX softphone?

RonR:
Quote from: Tack on July 28, 2011, 10:15:02 pm

Now, I am wondering if there's any way to have incoming landline calls also ring my 3CX softphone?


It should already be occurring by virtue of:

Physical Interfaces -> LINE Port -> InboundCallRoute : {(1?4073610000):aa},{ph,pp(ob290485489)}

from this post:

http://www.obitalk.com/forum/index.php?topic=502.msg7766#msg7766

Now that you have VoIP.ms working on SP2, if you also set:

Voice Services -> SP2 Service -> X_InboundCallRoute : {(1?4073610000):aa},{ph,pp(ob290485489)}

incoming calls from SP1, SP2, OBiTALK, and LINE Port trunks should all simultaneously ring both the OBi phone and the 3CX.


An InboundCallRoute consists of one or more rules : {rule},{rule},{rule}

The first rule that matches wins and no additional rules are checked.

{(1?4073610000):aa} : This rule is conditional on matching the CallerID and sends the caller to the Auto Attendant.

{ph,pp(ob290485489)} : This rule has no conditions and rings both the PHONE Port and OBiTALK number 290485489.

Tack:
Ron:

Great.  Just what I needed to know.

Thanks.

Tack:
Not sure what the problem is, but landline not ringing on 3CX. 

Google Voice set up and connected on 3CX.  Do I need similar account for the Obi Gateway number configured on 3CX?  I tried that using similar config approach as Google Voice, but 3CX fails to cnnect with that set-up.

Now, I discover that Google Voice isn't ringing the 3CX, either.  SP1 (google) inbound call routing is: {ph,pp(ob290737856)}

Where could I be missing the problem?

Thanks.

RonR:
A {ph,pp(ob290737856)} rule on any trunk should simultaneously ring the PHONE Port (ph) and the OBiON App (pp(ob290737856)).  Does the OBi phone ring?

I just tried it here and it works as expected.  I'm using X-Lite 4 instead of 3CX however.

Can you make a simple call to 3CX using: **9290737856

If you don't spot the problem, please post all four InboundCallRoute's (SP1/SP2/OBiTALK/LINE Port).

Navigation

[0] Message Index

[#] Next page