How to Connect to OBI 200 from iPhone
Howard687:
I completed all of the steps so that the softphone with my callcentric number, calls my OBI and connects me to the landline phone connect to the OBI. My next step was to follow your instructions to modify the X_InboundCallRoute parameter for SP4, but (I am obviously missing something), I do not seem able (allowed) to edit that field from my OBITalk portal/expert configuration. Is there some global setting that is preventing me from editing?
On a more general subject: I would really like to learn a bit more about what I am doing and why it work. I have perused the detailed Admin guide, but that is almost too much detail to start - is there some kind of more introductory tutorial out there?
thanks again - i have almost completed this configuration setup
drgeoff:
Quote from: Howard687 on March 24, 2017, 09:31:35 am
My next step was to follow your instructions to modify the X_InboundCallRoute parameter for SP4, but (I am obviously missing something), I do not seem able (allowed) to edit that field from my OBITalk portal/expert configuration. Is there some global setting that is preventing me from editing?
On a more general subject: I would really like to learn a bit more about what I am doing and why it work. I have perused the detailed Admin guide, but that is almost too much detail to start - is there some kind of more introductory tutorial out there?
1. You need to have both boxes at the right hand end of the line unticked before you can edit a field. When done click the Submit button at the bottom of the page.
2. There is a tutorial. 'OBi-DigitMap Call Route Tutorial' on the Docs and Downloads page - http://www.obihai.com/docs-downloads
azrobert:
Quote from: Howard687 on March 24, 2017, 09:31:35 am
On a more general subject: I would really like to learn a bit more about what I am doing and why it work.
Callcentric allows a user to define a separate extension for multiple devices. An extension can then call another device by dialing its extension number. You defined your OBi200 SP4 as extension 100 and Zoiper as extension 101. You can now dial 100 from Zoiper to contact your OBi200, but instead of ringing the phone the rule in the inbound route will direct the call to the Auto Attendant. You will be asked what you want to do. You will dial a "2" for "Make a New Call" and then you will enter the outbound number followed by a "#".
Define SP4 for Callcentric
Service Providers -> ITSP Profile D -> SIP -> ProxyServer: callcentric.com
Voice Services -> SP4 Service -> X_InboundCallRoute:
{101>17771234567:aa},{ph}
Voice Services -> SP4 Service -> AuthUserName: 17771234567
Voice Services -> SP4 Service -> AuthPassword: CC main account PW
Voice Services -> SP4 Service -> X_ServProvProfile: D
Replace 17771234567 with CC account number
Howard687:
Thank you. Thank you. This all seems to be working as expected. Now i'll do some more reading in hopes of understanding a bit more of what you all helped me configure.
Howard687:
Again Thanks. I read the tutorial, and understand the X_InboundCallRouter rules provided. I have added a '102' extension and registered that via Zoiper on a different iPhone. Now I would also want a call from 102 (2nd iPhone) to 100 (OBI 200) to be answered by the auto attendant. I could insert a new rule
{102>17771234567:aa}
but, from what I understood from the tutorial, this could be a single rule that looks like
{10[12] >17771234567:aa}
Is this correct?
Navigation
[0] Message Index
[#] Next page
[*] Previous page