No number showing on VoIP Phone

[Orien2k]

Hello, i'm trying to configure a Obi110 and a Asterisk FreePBX in a RaspberryPi. I can make calls to the world and receive calls from the world. But when i receive calls from outside all numbers come as OBITRUNK1 that is the login of my SIP. Is there a way to forward the number that is calling me so that it shows up on my 3CX Softphone ? I forgot to mention the Obi110 is configured as FXO Gateway my phone line is connected to the Obi110. The other persons gets our number on their phone.

[azrobert]

Turn on callerid spoofing on the trunk to FreePBX.

Service Providers -> ITSP Profile x -> SIP -> X_SpoofCallerID: Checked

[Orien2k]

It's turned On. on the FreePBX logs i can't find my number when i call the Obi110

[drgeoff]

On which incoming calls is this failure to display the number happening?

1. POTS calls on the LINE input of the OBi110.

2. VoIP calls coming in on an Asterisk trunk.

[Orien2k]

Hello, the problem occurs when I call from my Mobile phone to our Phone Line lets say my phone line is 22 555 10 20 and i call this number from my mobile..
I call my phone line and in my PC on the Softphone software (3CX) the number shows OBITRUNK1 (this is the Trunk Login). If i call an extension it shows the person name and the right extension.

On the Obi110 i have no Phone connected all calls are forward to the 3CX apps on the PCs.

[azrobert]

The following is how I setup RasPBX and an OBi110. I designed this method by myself. I modeled it the way 2 OBi devices can talk to each other. This is different than other tutorials I've seen. They have the OBi110 register as an extension. I don't and route inbound Line calls to the IP address of Asterisk. This requires you to define a trunk on FreePBX with the IP address of the OBi110. Without this trunk Asterisk will treat the call as Anonymous and reject it.  I dumped RasPBX because GoogleVoice stopped working. I'm now using Incredible PBX on my Raspberry Pi. I only have a GoogleVoice trunk defined, so I'm not setup to test and see if this method still works with a newer version of FreePBX/Asterisk.

Asterisk:
Setup an outbound trunk without registration for the OBi110:
Peer Details:
type=peer
username=OBi110
host=192.168.1.110       (IP Addr of OBi110)
port=5060                        (Port# of SP1)
canreinvite=no
insecure=invite,port
qualify=yes

OBi110:
SP1 must be defined as an SIP trunk to send/receive to/from Asterisk.
Setup a dummy SIP definition like this:

Service Providers -> ITSP Profile A -> SIP -> ProxyServer: 127.0.0.1
Service Providers -> ITSP Profile A -> SIP -> X_SpoofCallerID: Checked
Voice Services -> SP1 Service -> AuthUserName: OBi110
Voice Services -> SP1 Service -> X_RegisterEnable: (unchecked)

Route outbound calls from Asterisk to Line
Voice Services -> SP1 Service -> X_InboundCallRoute: li

Route inbound Line calls to Asterisk
Physical Interfaces ->Line Port -> InboundCallRoute:
sp1(900@192.168.1.100:5060)  (Asterisk IP address and port)
900 is an extension or you can setup an inbound route for 900