adding 3rd GV# to OBI200
bill-cary:
I have an OBI200 with 2 GV#s configured and working. I am trying to add another GV# but can't seem to get it to work. The configs are the same on both SP2 and SP3 except for the email address. I can't remember what I did to get #2 working, but I assume it is an authorization issue. I have entered the GV p/w . the configs are the same on the google voice settings also.
I have also tried to enter this on an OBI100 that has 1 GV#. So I guess I have lost the secret.
I assume I need to initially authorize it, but I can't find that function.
SteveInWA:
Hunh?
This sounds like you are trying to configure Google Voice locally on the OBi's device webpage. You can't do that.
You need to add your OBi(s) to the OBiTALK web portal, and then simply use the portal to authorize the desired SPs to each Google account.
bill-cary:
I think this is a little different. I am not configuring the OBI via the website but I have both the OBI and the website configured the same. Being old, I can't remember what the issue was and I have ignored it since. The 2nd phone works now on the 100 (it did not previously cause I had the password entered in the config). It is config as SP3 on the 200 and is configured the same as SP2 but it does not work. At least now it is telling me it can't authenticate. I don't know if that is progress or not. Phone 1 & 2 on the 200 work fine and as far as I can tell phone 3 is config the same except for the email address. Maybe I should just switch the email address for SP2/SP3 and see what happens.
SteveInWA:
I can't make sense out of your reply. It sounds like you are trying to juggle between both the OBiTALK web portal and the local webserver configurations for Google Voice. You cannot do that successfully, and trying to troubleshoot it is a complete waste of time.
Delete the problematic OBi off of the OBiTALK website. Perform a factory reset on the OBi by picking up the phone and keying in ***8 then 1.
Add the OBi back to the OBiTALK web portal via the **5 procedure.
Follow my instructions on the link below to set up Google Voice.
http://www.obitalk.com/forum/index.php?topic=8560.msg56460#msg56460
When doing so, first log into only the one Google/Gmail/Google Voice account in question. Make sure you are logged in to the correct account, and that the account has the correct inbound Google Voice phone number.
Repeat the setup procedure for the other Google Voice accounts, by logging out of one Google account, and logging into the other.
bill-cary:
I'm so confused now I have two threads going - let me clean this up.
OK - just ignore the other thread
given that I have 2 GV numbers configured and operating on the 200;
the first time ANOTHER SP is set up on an OBI must it be done on OBITALK AND the provisioning be enabled on system reboot? If so which provisioning - LUA, ITSP, or OBITALK?
maybe that is what you are trying to tell me?????????
Navigation
[0] Message Index
[#] Next page