Call Display is showing phone number AND !sip.google.com

(1/3) > >>

eSmart:
All,

We have over 10 Obi devices (Obi1022 & Obi202) and configured w/ GoogleVoice.  They have been working fine until several days ago.  All incoming call number is being displayed as <number>!sip.google.com.

For example, the incoming phone number is 16191234567, and the Obi1022 will show up as 16191234567!sip.google.com

I have updated Obi1022 to the latest firmware, but not able to fix this.  Anyone can help us to address this issue?

Thank you!

Beast:
My phone started doing this too.  I was going to start a thread, might as well jump into this one.  Here is a picture of what my caller id is showing.  Even if the number is stored on my phone it's not showing up with the name because of the !sip.google.com

I'm running on an Obi1062 FYI.

I'm actually kind of angry, because I Factory Reset the phone and reconfigured the phone on the ObiTalk Dashboard and it still didn't fix the problem.  Someone must know what's going on.  Here's a picture of what I'm seeing.

Keep in mind I blocked out the number for obvious reasons, but you get the idea.

azrobert:
Asterisk users are having the same problem, so it is nothing related to your OBi.
http://www.dslreports.com/forum/r31332656-Asterisk-Google-Voice-CallerID

You can remove the text with the following rule:

Voice Services -> SPx Service -> X_InboundCallRoute:
{(1xxxxxxxxxx<'!sip.google.com':>):ph},{ph}

Use OBi Expert to make this change.

Beast:
Robert you really are a hero member!

This works flawlessly.  Thank you!!!

eSmart:
Thanks Robert and Beast.

I have tried to Expert configuration (directly login to Obi via its IP) and change it.  Once it is rebooted, the change keeps revert back to the default value, ph.  Any idea how to address this?

I have tried the www.obitalk.com interface, and it does not even allow me to change the value of any Expert settings..  I am stuck..  :(

Navigation

[0] Message Index

[#] Next page