September 19, 2017, 08:04:55 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: Obi 1062 Intercom  (Read 5053 times)
eddiedon
Newbie
*
Posts: 1


« on: April 06, 2017, 12:11:35 pm »

We have 3 Obi 1062 phones and would like to be able to push one of the buttons to initiate an intercom communication with either of the 2 other phones. How is this enabled?
Logged
azrobert
Hero Member & Beta Tester
*****
Posts: 3074


« Reply #1 on: April 07, 2017, 08:47:25 am »

I don't know how to setup an intercom and since I only have one OBi1032 I have no interest to learn how. However, I know how to call another OBi device using a programmable key. Use OBi expert to make the following change.

IP Phone -> Programmable Keys -> Key x
Function: Presence Monitor
Service: OBiTalk
Number: 610123456

Replace 610123456 with the OBi number of the target OBi1062
Take the phone off-hook and press the program key.

OBi numbers are listed on the OBiTalk dashboard
Make sure there isn't any code in the receiving OBi1062 that will send the call to the Auto Attendant. The default is to send the call to the phone, but sometimes code is added by OBiTalk to send the call to the AA. It will be found here:

Voice Services -> OBiTalk Service -> InboundCallRoute
Logged
cmenow
Newbie
*
Posts: 1


« Reply #2 on: September 15, 2017, 04:43:46 pm »

I have two 1062 phones, I have setup a link between the two and assigned an extension (20, 21) to both units.  When I select the ObiLINE button and dial the extension the other phone rings.  Also, I've used *96 "barge in" to simulate the auto answer intercom feature found on most phones.  I'm new to this, so I'm still learning the ins and outs. 
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC