Minimizing the intrusion of landline call ringing

(1/2) > >>

jimk:
Almost all incoming calls on my land line port are annoying robo calls and I don't pay for caller ID. I would like to make  all incoming land line calls easier to ignore. One way to accomplish that would be greatly reducing the duration of the ring but I am open to all suggestions.  My phone is a cordless vtech with three extensions and an answering feature. I've looked at the Obi110 admin manual and searched for examples, but am not sure how to proceed. Would appreciate any suggestions.

LeftRight:
You can do this by changing ring setting on LINE port.

By default, LINE port uses Ring Profile - A, Default Ring pattern 1 ... (Physical Interface --> LINE port --> RingProfile & DefaultRing)

then, just go to Ring Settings --> Ring Profile A --> Ring Pattern 1 --> Ring Pattern. The default setting is interpreted as ON (2 second) and OFF (4 second), change it to: 60;(0+4) (no ring), or one short ring with long silence: 60;(.5+400)

jimk:
Thanks Left,

I used Ring Profile B so as to not affect my SP rings. THe values I settled on were:

60;(.5+10,.5+10)

That provided exactly what I wanted. Thanks again!

azrobert:
I would also like to eliminate the robo and telemarketing calls.
I successfully forwarded an incoming call based on CID out SP2 to CNN Headline News at "4153767253@podlinez.net".  Is there an address I could route a call that would play the "Out of Service" message or something similar.

Thanks

QBZappy:
If you want to blacklist numbers, consider sending them to the FCC "1-888-CALL-FCC" ;D

Navigation

[0] Message Index

[#] Next page