EnableLINEPortBargeIn

<< < (2/2)

drgeoff:
Perhaps you are using the local interface to change that setting and sooner or later it is being changed back by the portal. http://www.obitalk.com/forum/index.php?topic=61.msg109#msg109

Wilbour:
Ding, ding ding!

That's what was happening. I accessed the 110 directly via my browser and was able to Enable Barge in.

That was not an option using the OBiTalk web interface.

Well the ""System Management / Auto Provisioning."  In the Auto Provisioning settings section, select Disabled from the drop down menu next to Method."

Was disabled by default.

All seems good, for now  ;)

I am curious why this can't seem to be changed using OBitalk Web interface though.

drgeoff:
Quote from: Wilbour on April 19, 2017, 07:44:51 am

That was not an option using the OBiTalk web interface.
....

I am curious why this can't seem to be changed using OBitalk Web interface though.

Yes it can.  Clear both the right most boxes, then you can set the enable one.

Navigation

[0] Message Index

[*] Previous page