Unable to Edit Fields in ExpertConfiguration

(1/2) > >>

er824:
Hi,

I'm trying to edit the Phone Outbound Call Route in the Expert Configuration Set up wizard but can't edit any of the values. When I click in the displayed text fields it doesn't respond to any keyboard events. I've tried from Chrome, IE, and FF on Windows 7 and from Safari on a Mac.

I suspect I'm doing something stupid...  :(

-Eric

earthtoobi:
Next to  Phone Outbound Call Route: uncheck obitalk settings,device default settings: then you can edit it.

er824:
Thank you. I could of sworn I tried that but obviously not.

Can you sanity check the outbound call route? I changed the default rule so that 411 and 911 calls would be sent out over sp2.

{([1-9]x?*(Mpli)):pp},{(<#:>):li},{(411|911):sp2},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}

Thanks,
Eric

RonR:
The changes you've made will work.

I would argue, however, that 411 doesn't deserve special handling in the OutboundCallRoute.  In my opion, only 911 deserves special handling in the OutboundCallRoute and 411 should be handled routinely in the ITSP Profile B DigitMap.


Physical Interfaces -> PHONE Port -> OutboundCallRoute:

{([1-9]x?*(Mpli)):pp},{(<#:>):li},{911:sp2},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}


Service Providers -> ITSP Profile B -> General -> DigitMap:

(411|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*]@@.)

er824:
Ron,

Would you mind explaining the difference between configuring the DialMap vs the outbound call route?

I was trying to route 411 over sp2 because Callcentric will connect you to a free 411 service.

-Eric

Navigation

[0] Message Index

[#] Next page