Hi, hoping someone can assist me with where I've gone wrong in setting up my dial rules .. for some reason , all numbers dialed that begin with a '1' seem to fall through to LINE1 (PSTN) and not via SP1
Call 1 09/16/2017 12:28:41
Terminal ID PHONE1 SP1
Peer Name
Peer Number 0386959999 0386959999
Direction Outbound Outbound
12:28:41 New Call
12:28:42 Call Connected
12:28:48 End Call
Call 2 09/16/2017 12:14:49
Terminal ID PHONE1 LINE1
Peer Name
Peer Number 1900123456 1900123456
Direction Outbound Outbound
12:14:49 New Call
12:14:54 Call Connected
12:14:57 End Call
Call 3 09/16/2017 12:00:30
Terminal ID PHONE1 LINE1
Peer Name
Peer Number 1800240481 1800240481
Direction Outbound Outbound
12:00:30 New Call
12:00:35 Call Connected
12:00:38 End Call
Call 4 09/16/2017 11:45:27
Terminal ID PHONE1 SP1
Peer Name
Peer Number 0397341234 0397341234
Direction Outbound Outbound
11:45:27 New Call
11:45:37 Call Connected
11:47:12 End Call
Call 5 09/16/2017 10:55:20
Terminal ID PHONE1 SP1
Peer Name
Peer Number 001164216543210 001164216543210
Direction Outbound Outbound
10:55:20 New Call
10:55:21 End Call (404 Not Found)
Call 6 09/16/2017 09:19:16
Terminal ID PHONE1 LINE1
Peer Name
Peer Number 1800240481 1800240481
Direction Outbound Outbound
09:19:16 New Call
09:19:20 Call Connected
09:19:26 End Call
Call 7 09/16/2017 09:13:44
Terminal ID PHONE1 SP1
Peer Name
Peer Number 0412123456 0412123456
Direction Outbound Outbound
09:13:44 New Call
09:13:51 End Call
My 'Phone Port' Digit map looks like this.
((Msos)|(Mfre)|(Mlrn)|(Mspe)|(Mpre)|(Mloc)|(Mint)|(Mnat)|[1L9]x?*(Mpli)|**0|***|#|##|**70(Mli)|**8(Mbt)|**81(Mbt)|**82(Mbt2)|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**9(Mpp)|(Mpli))
With an 'Outbound call route' , like this.
{(Msos)|(Mfre)|(Mspe)|(<##:>)|(<**70:>(Mli)):LI},{(Mloc)|(Mint)|(Mnat)|(<**1:>(Msp1)):sp1},{(<**2 :>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{([1L9]x?*(Mpli))| (<**9:>(Mpp)):PP},{**0:AA},{***:AA2},{(<**8:>(Mbt))| (<**81:>(Mbt)):bt},{(<**82:>(Mbt2)):bt2},{(Mpli):pli}
User defined digit maps are..
fre = (1800xxx xxx|180x xxx)
lrn = (1300xxx xxx|130xx xx|13[123456789]xxx)
spe = (1100|114x xxxx|119x|122x|1225|123x|124xx|125xxx|1268x|1268 xxx|1268 xxx xxx|127x.|1282|128xxx|15x.)
pre = (190x xxx xxx)
my other User Defined digit maps for local, national (incl mobiles),international, all seem to work ok.. any clues what i'm missing or where to look ?
loc = (<03>[456789]xxx xxxx)
nat = (0[23478]xxxx xxxx)
int = (0011xx.)