Is there an OBi110 (or other) IP location to set the enable/disable call forwarding (Unconditional)?
Something like 192.168.0.156/SetUnconditionalCallForward.htm (strictly as an example)
The idea is to use a HA controller (like Vera or SmartThing) to set the call forward enable/disable based on house mode. Enable when away mode. Disable when Home mode. Or use with security system similarly (away = enabled. Home = disabled).
For that matter, is there a listing of the IP locations on the OBi110 or others?
I've seen on other posts:
-
http://192.168.0.xx/callstatus.htm-
http://192.168.0.xx/record.au (returns nothing if no call is in progress. otherwise returns a file to save) I have not looked into this more than indicated.
-
http://192.168.0.xx/PI_FXS_1_Stats.xml Phone & Line status
use your IP address instead of 192.168.0.xx
----------------------------------------------------------
UPDATE: Using Chrome (and maybe others):
- Rightclick on the OBi device webpage.
- Select INSPECT. A pane will open to the right.
- Select SOURCE tab.
- Expand MAINFRAME
- Expand Your IP address
- On the first line under that, right click and copy the address
That is the webpage address in the OBi to the page you are looking at.
For example:
http://192.168.0.xx/VS_1_X_FXO_1_.xml (use your IP address instead of 192.168.0.xx)
Not sure what one can do with this yet...
At a minimum you can parse out the details of the various entries. Not sure how you would actually change a setting.