Two Obihai devices
prorec:
Hi,
I have two Obihai devices. I have a model 202 and a model 200. Both are connected to the same router. The 202 has been installed for some time and works fine but I can't get the 200 to register on the Obihai web site. When I call to register I get a message saying "No service configured error."
Is it possible that two devices won't work on one router or is it something else?
On the 200 the power LED is solid green, the middle LED blinks and the phone icon LED is off. The phone icon LED off indicates the port is not enabled but looking at the router the lights are on. I recently removed a different device from that port and it worked so I think the port is enabled.
Any ideas? Thanks.
drgeoff:
What do you mean by "I can't get the 200 to register on the Obihai web site"? The **5 xxxx procedure does not complete or a Service Provider registration is not successful?
Can you reach the **9 222 222 222 test number from the 200?
prorec:
Yes, the **5 xxxx does not complete. It says it failed. I can call **9 222 222 222 and get the recording saying "No service configured error." This is using the 200 Model.
I have not tried to set up the Service Provider yet.
drgeoff:
Quote from: prorec on June 13, 2017, 04:20:10 pm
Yes, the **5 xxxx does not complete. It says it failed. I can call **9 222 222 222 and get the recording saying "No service configured error." This is using the 200 Model.
I have not tried to set up the Service Provider yet.
You are NOT reaching the **9 222 222 222 number from the 200. Dial that from the 202 and hear the difference.
It is pointless trying the **5 procedure until the 200 can reach the echo test number.
Dial ***1 and report back here what you hear.
prorec:
I dialed ***1 with the 200 and got nothing. Just a click sound. I dialed ***1 with the 202 and gives me a message with the IP address, etc.
Navigation
[0] Message Index
[#] Next page