When I hang up my OBi200 phone, the phone on the other end never hangs up
drgeoff:
And here. https://pbxinaflash.com/community/threads/google-voice-behavior-on-hangup.21670/
Not just OBis.
Edit. The PBX in a flash was started by the same person as the DSL reports one.
SteveInWA:
Google engineering is aware of the problem and they're working on it. No eta. You can see several threads over on the Google Voice forum about people's international long distance calls terminating on one leg, but not the other. It's not just a Chat/XMPP issue.
"Do not attempt to adjust your set".
The best way to help would be to post examples of your problem calls on the Google Voice Help Forum. Start a new post; don't piggyback on some other user's post with a "me too". If you make international calls and this happens, post a screenshot of the billing history table on this page: https://www.google.com/voice/redirection/voice#billing Redact (cover up) all but the last 4 digits of the telephone numbers in the history, for privacy's sake.
Posting the date, time, timezone, and last 4 digits of your GV phone number will enable them to find the calls in their logs. Thanks.
Google rolled out a fix for this problem yesterday. Most, if not all, of these cases should no longer occur. If you do experience new calls with this behavior, please create a new post over on the Google Voice Help Forum (link below my signature).
Moses1234:
I have a obi 202, SP1 set as my main line, SP2 as fax & I'm having the same problem, first 2 days it worked perfectly. (added some digitmap outbound call routing) & then it stopped working properly, had no dial tone only if a manually disconnected the jack, then for first 15-30 seconds it has a dial tone, then it stops, or if i make a call it doesn't disconnect. Intrestinng thing is that if i switch between jacks, set my main GV to SP2 & fax to SP1 & it works!
How can i make it work each on the correct SP?
Navigation
[0] Message Index
[*] Previous page