Obi110 ring and 200 to not ring

<< < (2/2)

SteveInWA:
Quote from: Taoman on July 14, 2017, 04:28:20 pm

Quote from: azrobert on July 14, 2017, 02:29:31 pm


OBi200:
Voice Services -> SP3 Service -> X_InboundCallRoute: ph,ph2



On an OBi200 or Obi1xx device, what does "ph2" signify?


Well, I think Macbeth has that answer.

She should have died hereafter;
There would have been a time for such a word.
To-morrow, and to-morrow, and to-morrow,
Creeps in this petty pace from day to day
To the last syllable of recorded time,
And all our yesterdays have lighted fools
The way to dusty death. Out, out, brief candle!
Life's but a walking shadow, a poor player
That struts and frets his hour upon the stage
And then is heard no more: it is a tale
Told by an idiot, full of sound and fury,
Signifying nothing.

Enter a Messenger


Thou comest to use thy tongue; thy story quickly.

MatthewF:
First off all, sorry for the delay. And thanks for the Macbeth quote. Well deserved. On this point...
Quote from: drgeoff on July 14, 2017, 12:34:46 pm

Quote from: MatthewF on July 14, 2017, 11:34:10 am

2) now configure the obi110.

Voice Services -> obitalk service -> ph,ph2

Which in my case I accomplished just by checking device default.

That's odd.  An Obi110 has only one phone port, so ph2 does not make sense.  The default is ph.

I don't konw why i wrote ph,ph2. Indeed the default is ph and that is what my system shows. Sorry for the confusion.

MatthewF:
Quote from: azrobert on July 14, 2017, 02:29:31 pm

Set OBi200/SP3 to a low priority and hopefully the OBi110 will start receiving calls. Please post if this works or not.

OBi200:
Voice Services -> SP3 Service -> X_InboundCallRoute: ph,ph2
Voice Services -> SP3 Service -> X_XMPPPriority: 33


I really like the idea of this solution, but this did not work for me. My obi200 would still ring and not my obi110. However...

when I went to the ip address for my obi110 I saw that it also has this setting (though oddly not through obitalk.com). When I set that like this:

OBi110:
Voice Services -> SP3 Service -> X_XMPPPriority: 127

Then it worked.

MatthewF:
I recently replaced my obi100 with the obi1062. i found that there was one more setting I had to change in order to get the new phone to ring but not the obi200.

Voice Services -> SP3 Service -> X_GTalkSimultaneousRing

Uncheck the box.

That worked.

Navigation

[0] Message Index

[*] Previous page