Oh Wise people of the internet - I come to thee with a question of great importance for me ...
I followed the instructions in the OBi-VoIP-Device-Attach-Legacy-IP-Phone-Workbook-v1-0.pdf document. While I did purchase the 202 to specifically set it up as option 1, I wasn't able to get that to work - But changing the physical setup, I followed the option 2 route and got THAT to work.
HOWEVER - When receiving calls, my SPA 504G did not ring. I then found some info for setting the X_InboundCallRoute to:
ph,sp4(1001@local_client) and THAT seemed to work.
Now, however, I am not able to make outbound calls - And when I try to 'Real' phone attached to ph rings when trying to call out using the IP Phone...
Here are a few highlights of my setup:
OBISP1 - Google Voice
X_InboundCallRoute | ph,sp4(1001@local_client) |
SP4 - SPA Proxy
X_ServProvProfile | D |
X_RingProfile | B |
X_RegisterEnable | No (Unchecked) |
X_UserAgentPort | 5063 |
X_Proxy | Yes (Checked) |
AuthUserName | 1001 |
ITSP Profile D
General/SignalingProtocol | SIP |
SIP/ProxyServer | 192.168.2.71 <- I.P. of the IP Phone | | 5063 |
SIP/X_SpoofCallerID | Yes (Checked) |
X_UserAgentPort | 5063 |
X_Proxy | Yes (Checked) |