Multiple extensions on one call (like POTS)? Possibly FreePBX?
drgeoff:
You have not understood azrobert's post at all.
1. You do NOT require a POTS line. You DO require an OBiLINE.
2. You can only barge in to a call that has been answered (or initiated) on a phone plugged in to an OBi202.
3. The purpose of the OBiLINE is to enable a barge in from one phone port on the 202 to the call in progress on the other phone port on that 202. The RJ11 port on the OBiLINE emulates an analogue phone and can thus be wired into a phone port on the 202. The barging in VoIP call from afar is directed to the OBiLINE and dials a # into the phone port.
There is no barge into the OBi10x2 phones. (Even on the same LAN.)
kayrjay:
Got it thanks
kayrjay:
I can't seem to find the OBi line adapter anywhere. One site I found https://www.voipsupply.com/obihai-obiline says that the OBi line adapter been discontinued and that the replacement
is an OBi212. However, I can't find the 212 anywhere either. And, I don't
know if the OBi212 will Do what the line adapter would do as described here.
Any help would be appreciated!
azrobert:
I did some more testing and the Line Port doesn't 100% emulate an analog phone. Looping the Line Port to the Phone Port seems to work when there isn't another phone connected to the Phone Port using a splitter. It also works when another phone is on-hook and connected via a splitter. When the Phone connected to the splitter is on an active call, the call out the Line Port will fail. When the looped Line Port is on an active call and the phone connected to the splitter is taken off-hook, the outbound audio from the Line Port is not understandable (very low and distorted). You might want to reconsider this solution if you need a phone connected to Phone Port#2.
Did you read the disclaimer in my previous post? All my testing was done on an OBi110 which only has one phone port, so I couldn't test the barge-in part. I only made an outbound call with the looped line port, so I'm assuming calling the 1st phone port on an OBi202 will successfully barge-in.
drgeoff:
Quote from: kayrjay on August 30, 2017, 08:24:37 pm
I can't seem to find the OBi line adapter anywhere. One site I found https://www.voipsupply.com/obihai-obiline says that the OBi line adapter been discontinued and that the replacement
is an OBi212. However, I can't find the 212 anywhere either. And, I don't
know if the OBi212 will Do what the line adapter would do as described here.
Any help would be appreciated!
There has been neither an official announcement by Obihai nor any rumours of the discontinuation of OBiLINE or the introduction of a new OBi212 ATA. However https://www.voipsupply.com/obihai-obi212-1-fxs-1-fxo-adapter shows a shipping date in October this year and the specs indicate that it has one FXS port and one FXO port, ie it is the replacement for the End-of-Lifed Obi110. More at https://fccid.io/2ADXF-OBI212.
Navigation
[0] Message Index
[#] Next page
[*] Previous page