Adapters at different locations
frunobulax:
Looking at having an OBI200 at two locations, with only one active at a time. Is it easy to toggle between the two? I.e., disable one and enable the other. I currently use Vonage and use their "Move a line" to do this. Thanks.
drgeoff:
Not sure what exactly you are asking.
Have them both configured the same but only power up whichever one you want to use.
Have them both configured the same, registered on the Obitalk portal and powered up simultaneously. Log into the portal from a browser just about anywhere in the world and enable/disable as required.
Have them both configured the same and powered up simultaneously. Most ITSPs support more than one device SIP registered to the same account. Both devices ring on incoming calls; answer on either. Either device can make a call.
frunobulax:
I probably should have mentioned that I'm using GV, not a SIP provider. Does that change anything?
Would prefer not to rely on unplugging adapters. They are plugged into the same strip the powers modem/router, which I do want to leave on for guests. Not to mention that I'll just forget to do it.
When you say enable/disable, where/how is that done - in the OBi dashboard?
Tx.
drgeoff:
Quote from: frunobulax on September 06, 2017, 09:31:45 am
I probably should have mentioned that I'm using GV, not a SIP provider. Does that change anything?
Would prefer not to rely on unplugging adapters. They are plugged into the same strip the powers modem/router, which I do want to leave on for guests. Not to mention that I'll just forget to do it.
When you say enable/disable, where/how is that done - in the OBi dashboard?
Tx.
I'm only 90% sure that GV would work with two adaptors and I'm not currently in a position to test it at the drop of a hat.
Yes, via the dashboard, possibly using the Expert mode.
frunobulax:
If you or anyone knows where this setting is, I would appreciate it. Looked at expert settings - no idea what most of it means.
I suppose the worst case is I remove/re-add/configure adapters whenever I move...
Navigation
[0] Message Index
[#] Next page