Dial to PSTN

<< < (3/3)

jerome:
To summarize what is working and what is not working in my config:

Working: dialing GV in OBI110(in France) AA answer then press 2**8 and French Number# will dial to the Line(PSTN)

No Working Dialing to PSTN (French) not picking the AA Trusted are correct

Not Working GV in OBI200(in US) AA answer how to bridge to the OBI110 to call PSTN?

Thank you
Jerome

azrobert:
Use OBi Expert to make the following changes.

OBi200

Assuming GV is defined on SP1
Voice Services -> SP1 Service -> X_InboundCallRoute:
{18001234567:pp(110110110)},{ph}

Replace 18001234567 with the CallerID you want to send to the AA on the OBi110
Replace 110110110 with the OBi number of the OBi110
The above CallerID will be routed to the OBi110 via the OBiTalk network and then the rules in the OBi110 will send it to the AA

OBi110

Voice Services -> OBiTalk Service -> X_InboundCallRoute:
{200200200:aa},{ph}

Replace 200200200 with the OBi number of the OBI200

Physical Interfaces -> Line Port -> InboundCallRoute:
{01234567:aa},{ph}

Replace 01234567 with the CallerID you want to send to the AA

The OBi numbers are listed on the OBiTalk Dashboard

jerome:
Hi Folks

in my line inbound from ob110:
{(x.012345678):aa},{pp(ob1234567),ph}

That's seems to get to obi1234567 (obi200) the GV answer as it was me want to make a call not as th OBI AA.

What's wrong

Jerome

Navigation

[0] Message Index

[*] Previous page