December 05, 2019, 02:08:13 pm *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: "Backing Off: Authentication error" on OBi200 with 5757EX firmware  (Read 7811 times)
arobatino
Jr. Member
**
Posts: 22


« on: December 29, 2017, 02:03:50 pm »

My OBi200 (with 5757EX firmware) has been unable to connect to the GV server since at least last night. There were no configuration changes since long before it stopped working. After it stopped, I tried changing to Google's DNS servers (8.8.8.8 and 8.8.4.4) and deleting and re-adding my GV Set-Up, with no change. I believe the failure has happened trying to connect to at least 2 different servers (it currently says "Connecting to 173.194.204.125").
« Last Edit: December 29, 2017, 02:25:30 pm by arobatino » Logged
arobatino
Jr. Member
**
Posts: 22


« Reply #1 on: December 30, 2017, 08:41:06 am »

Yesterday, I was very briefly connected with the OBi200, enough to make a few test calls, then disconnected again. Last night I tried hooking up my OBi100 with the original 2886 firmware (not the hacked version), since other people say it's working for them. This morning, I am finally connected. It's only working for outgoing calls, unreliably. Incoming doesn't work at all, even though everything is configured properly. Clearly something is happening at Google's end. As long as it's connected I'm not going to try switching back to the OBi200.
Logged
arobatino
Jr. Member
**
Posts: 22


« Reply #2 on: December 31, 2017, 09:17:54 am »

The OBi100 started getting the "Backing Off" error last night. Reconnected the OBi200 and am back waiting with the "Connecting to 173.194.204.125". Normally it would connect almost immediately.

Edit: I am now connected with the OBi200 (no telling how long it will last). Outgoing calls more or less work (though sometimes I have to redial to get a decent connection).
« Last Edit: December 31, 2017, 11:58:35 am by arobatino » Logged
arobatino
Jr. Member
**
Posts: 22


« Reply #3 on: January 17, 2018, 08:35:41 am »

Sorry for the noise. It was apparently a router issue. I swapped in a different router and the problem is gone.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC