I folks, spent hours with this and cannot figure out the issue.
I have two different phone numbers on the same account with CallCentric. One number is configured as extension 100, the other number is configured as extension 101. One number is set-up in Obitalk for in-bound and out-bound to SP1, the other number to SP2. Registrations are different.
Whenever I call on either number, it rings on both ports. I have tried different configurations, call treatments, etc. Nothing seems to work.
However I did this on another Obi 202 and it works just fine. One number rings on one port, the other number on another port. But with the other 202, I have no such luck.
What could I be missing?
